4w 240 tire michelin pilot sport 4 s en us product in context nosignature 16 slash 9

What tyre pressure for my car?

Tips & Advice for Car, SUV & Van tyres

Having the correct recommended tyre pressure in your vehicle’s tyres not only optimises the performance but also increases your personal safety and those of other road users when driving.

On the other hand, incorrect tyre pressure will reduce the grip of your tyres and increase your braking distances. It can also damage your tyres, reduce their life span and increase your fuel consumption. Let's take a look at how to avoid these risks and what tyre pressure is needed for your vehicle.

What pressure for your tyres?

Checking your tyre pressure is simple and inexpensive. It is important to use the pressure recommended by the manufacturer to avoid overinflation or under-inflation.

  • Overinflation can lead to premature tyre wear in the centre of the tread.
  • Under-inflation can lead to premature tyre wear in the shoulder area. It reduces the grip qualities.
     

The tyre pressure recommended by your manufacturer

The pressure has been optimally defined by the manufacturer for the vehicle / tyre combination. All performances have been checked by the manufacturer with a clear objective: your safety. This is why it is imperative to consult the pressure recommended by your manufacturer for your vehicle. It is generally indicated:

  • on a sticker in your driver's side door,
  • in the fuel filler flap,
  • or in the vehicle manual.
     

The recommended pressure for your front and rear tyres may not be the same. You will also see that two types of pressure are indicated:

  • Normalized pressure: this is the standard pressure
  • Loaded pressure: to be adopted when the vehicle is particularly loaded, for example when going on holiday


The pressure is indicated in the pressure unit used in the country you live in: in BAR or in PSI (1 bar = 14.50 psi).

microsoftteams image 3

The risks of incorrect tyre pressure

The manufacturer's recommendations are essential for your safety and you should refer to them whenever you check the pressure of your tyres. Otherwise their performance may be reduced, especially in the following cases:

Endurance

Driving on underinflated tyres causes deterioration of the overall tyre structure which can lead to dislocation and/or bursting.

Aquaplaning

If below the vehicle manufacturers recommended tyre pressure, there is a sharp increase in the risk of aquaplaning.

Braking

A difference of 1 bar or 14 psi, from the vehicle manufacturers pressure recommendation can increase the braking distance on wet roads by 11 metres.

Fuel Consumption

Tyres under inflated by 14 psi (1 bar) have increased rolling resistance, which increases fuel consumption by 1 full tank of fuel per year.

Correct tyre pressure: a safe, economical and responsible move

A tyre inflated to the recommended tyre pressure improves safety, is more economical in use, and is better for the environment.

And since a tyre loses some of its pressure through natural causes (typically around 0,07 bars per month), regular checking is necessary.

If your vehicle was manufactured after 2014, it should be equipped with a TPMS (Tyre Pressure Monitoring System) that alerts you when your tyres are under-inflated. However, it is recommended that you do not wait for this signal to worry about the correct pressure of your tyres.

microsoftteams image 5
map search desktop

Find tyre dealers near you in seconds

Search by
Address, City or ZIP code
Car
  • Car
  • Motorbike
Locate me
Search
You are using an unsupported web browser
You are using a website browser that is not supported by this website. This means that some functionnality may not work as intented. This may result in strange behaviors when browsing round. Use or updgrade/install one of the following browsers to take full advantage of this website